Primer
Priming Agent - used to prime the surface before the application of decorative paints, pastes and plasters, such as Let's Shine, Moonlight, Silver Sand, Polaris, Royal Silk, Modern Stone, Mystic and Metaliq. The primer is used to strengthen the substrate, reduce or equalize its absorbency and optimize adhesion. It can be used to prepare the following surfaces for painting: plaster, putty, plasterboards, concrete etc.
Application
The substrate should be clean, dry and stable. Residues of paint, adhesives and other peeling coatings must be removed. In the case of new lime plaster wait 3-4 weeks before applying decorative coatings. Use work clothes, as stains caused by primer can be difficult to remove.
The product is ready to use, no need to dilute it. Before use, mix carefully. Apply the primer using a roller or a brush. For very absorbent substrates - apply 2 layers. After completing the work, ventilate the room until the odor is gone.
Technical information
Tools: brush/roller
No. of layers: 1/2
Coverage: 6-12 m²/l (1 layer) - depending on the substrate
Completely dry: about 12h
Tool cleaning: warm water with detergent
Manufacturer:
Unicell International sp. z o.o.
Supraslska 25
16-010 Wasilkow
Poland
tel. +48 667 950 839
E-mail address of the responsible:
[email protected]
Primer
Item number: Primer
Hazards identification:
Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit (cat. A/I/WB) 200 g/l, product contains < 200 g/l.Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Do not enter product remains into the sewage system. Dispose of contents/container in a licensed waste disposal facility.Keep out of reach of children.
Original: $9.33
-70%$9.33
$2.80
Description
Priming Agent - used to prime the surface before the application of decorative paints, pastes and plasters, such as Let's Shine, Moonlight, Silver Sand, Polaris, Royal Silk, Modern Stone, Mystic and Metaliq. The primer is used to strengthen the substrate, reduce or equalize its absorbency and optimize adhesion. It can be used to prepare the following surfaces for painting: plaster, putty, plasterboards, concrete etc.
Application
The substrate should be clean, dry and stable. Residues of paint, adhesives and other peeling coatings must be removed. In the case of new lime plaster wait 3-4 weeks before applying decorative coatings. Use work clothes, as stains caused by primer can be difficult to remove.
The product is ready to use, no need to dilute it. Before use, mix carefully. Apply the primer using a roller or a brush. For very absorbent substrates - apply 2 layers. After completing the work, ventilate the room until the odor is gone.
Technical information
Tools: brush/roller
No. of layers: 1/2
Coverage: 6-12 m²/l (1 layer) - depending on the substrate
Completely dry: about 12h
Tool cleaning: warm water with detergent
Manufacturer:
Unicell International sp. z o.o.
Supraslska 25
16-010 Wasilkow
Poland
tel. +48 667 950 839
E-mail address of the responsible:
[email protected]
Primer
Item number: Primer
Hazards identification:
Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit (cat. A/I/WB) 200 g/l, product contains < 200 g/l.Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Do not enter product remains into the sewage system. Dispose of contents/container in a licensed waste disposal facility.Keep out of reach of children.
